Style Guide¶

Write functions, not just scripts¶

Writing code as a series of steps at the top level is a quick way to get started solving a problem, but you should try to divide a program into functions as soon as possible. Functions are more reusable and testable, and clarify what steps are being done and what their inputs and outputs are. Furthermore, code inside functions tends to run much faster than top level code, due to how Julia’s compiler works.

It is also worth emphasizing that functions should take arguments, instead of operating directly on global variables (aside from constants like pi).

Avoid writing overly-specific types¶

Code should be as generic as possible. Instead of writing:

convert(Complex{Float64},x)

it’s better to use available generic functions:

complex(float(x))

The second version will convert x to an appropriate type, instead of always the same type.

This style point is especially relevant to function arguments. For example, don’t declare an argument to be of type Int or Int32 if it really could be any integer, expressed with the abstract type Integer. In fact, in many cases you can omit the argument type altogether, unless it is needed to disambiguate from other method definitions, since a MethodError will be thrown anyway if a type is passed that does not support any of the requisite operations. (This is known as duck typing.)

For example, consider the following definitions of a function addone that returns one plus its argument:

addone(x::Int)=x+1# works only for Intaddone(x::Integer)=x+one(x)# any integer typeaddone(x::Number)=x+one(x)# any numeric typeaddone(x)=x+one(x)# any type supporting + and one

The last definition of addone handles any type supporting one() (which returns 1 in the same type as x, which avoids unwanted type promotion) and the + function with those arguments. The key thing to realize is that there is no performance penalty to defining only the general addone(x)=x+one(x), because Julia will automatically compile specialized versions as needed. For example, the first time you call addone(12), Julia will automatically compile a specialized addone function for x::Int arguments, with the call to one() replaced by its inlined value 1. Therefore, the first three definitions of addone above are completely redundant.

Handle excess argument diversity in the caller¶

Instead of:

function foo(x,y)x=Int(x);y=Int(y)...endfoo(x,y)

use:

function foo(x::Int,y::Int)...endfoo(Int(x),Int(y))

This is better style because foo does not really accept numbers of all types; it really needs Int s.

One issue here is that if a function inherently requires integers, it might be better to force the caller to decide how non-integers should be converted (e.g. floor or ceiling). Another issue is that declaring more specific types leaves more “space” for future method definitions.

Append ! to names of functions that modify their arguments¶

Instead of:

function double{T<:Number}(a::AbstractArray{T})fori=1:endof(a);a[i]*=2;endaend

use:

function double!{T<:Number}(a::AbstractArray{T})fori=1:endof(a);a[i]*=2;endaend

The Julia standard library uses this convention throughout and contains examples of functions with both copying and modifying forms (e.g., sort() and sort!()), and others which are just modifying (e.g., push!(), pop!(), splice!()). It is typical for such functions to also return the modified array for convenience.

Avoid strange type Unions¶

Types such as Union{Function,AbstractString} are often a sign that some design could be cleaner.

Avoid type Unions in fields¶

When creating a type such as:

type MyType...x::Union{Void,T}end

ask whether the option for x to be nothing (of type Void) is really necessary. Here are some alternatives to consider:

• Find a safe default value to initialize x with
• Introduce another type that lacks x
• If there are many fields like x, store them in a dictionary
• Determine whether there is a simple rule for when x is nothing. For example, often the field will start as nothing but get initialized at some well-defined point. In that case, consider leaving it undefined at first.
• If x really needs to hold no value at some times, define it as ::Nullable{T} instead, as this guarantees type-stability in the code accessing this field (see Nullable types)

Avoid elaborate container types¶

It is usually not much help to construct arrays like the following:

a=Array{Union{Int,AbstractString,Tuple,Array}}(n)

In this case Array{Any}(n) is better. It is also more helpful to the compiler to annotate specific uses (e.g. a[i]::Int) than to try to pack many alternatives into one type.

Use naming conventions consistent with Julia’s base/¶

• modules and type names use capitalization and camel case: moduleSparseArrays, immutableUnitRange.
• functions are lowercase (maximum(), convert()) and, when readable, with multiple words squashed together (isequal(), haskey()). When necessary, use underscores as word separators. Underscores are also used to indicate a combination of concepts (remotecall_fetch() as a more efficient implementation of fetch(remotecall(...))) or as modifiers (sum_kbn()).
• conciseness is valued, but avoid abbreviation (indexin() rather than indxin()) as it becomes difficult to remember whether and how particular words are abbreviated.

If a function name requires multiple words, consider whether it might represent more than one concept and might be better split into pieces.

Don’t overuse try-catch¶

It is better to avoid errors than to rely on catching them.

Don’t parenthesize conditions¶

Julia doesn’t require parens around conditions in if and while. Write:

ifa==b

instead of:

if(a==b)

Don’t overuse ...¶

Splicing function arguments can be addictive. Instead of [a...,b...], use simply [a;b], which already concatenates arrays. collect(a) is better than [a...], but since a is already iterable it is often even better to leave it alone, and not convert it to an array.

Don’t use unnecessary static parameters¶

A function signature:

foo{T<:Real}(x::T)=...

should be written as:

foo(x::Real)=...

instead, especially if T is not used in the function body. Even if T is used, it can be replaced with typeof(x) if convenient. There is no performance difference. Note that this is not a general caution against static parameters, just against uses where they are not needed.

Note also that container types, specifically may need type parameters in function calls. See the FAQ Avoid fields with abstract containers for more information.

Avoid confusion about whether something is an instance or a type¶

Sets of definitions like the following are confusing:

foo(::Type{MyType})=...foo(::MyType)=foo(MyType)

Decide whether the concept in question will be written as MyType or MyType(), and stick to it.

The preferred style is to use instances by default, and only add methods involving Type{MyType} later if they become necessary to solve some problem.

If a type is effectively an enumeration, it should be defined as a single (ideally immutable) type, with the enumeration values being instances of it. Constructors and conversions can check whether values are valid. This design is preferred over making the enumeration an abstract type, with the “values” as subtypes.

Don’t overuse macros¶

Be aware of when a macro could really be a function instead.

Calling eval() inside a macro is a particularly dangerous warning sign; it means the macro will only work when called at the top level. If such a macro is written as a function instead, it will naturally have access to the run-time values it needs.

Don’t expose unsafe operations at the interface level¶

If you have a type that uses a native pointer:

type NativeTypep::Ptr{UInt8}...end

don’t write definitions like the following:

getindex(x::NativeType,i)=unsafe_load(x.p,i)

The problem is that users of this type can write x[i] without realizing that the operation is unsafe, and then be susceptible to memory bugs.

Such a function should either check the operation to ensure it is safe, or have unsafe somewhere in its name to alert callers.

Don’t overload methods of base container types¶

It is possible to write definitions like the following:

show(io::IO,v::Vector{MyType})=...

This would provide custom showing of vectors with a specific new element type. While tempting, this should be avoided. The trouble is that users will expect a well-known type like Vector() to behave in a certain way, and overly customizing its behavior can make it harder to work with.

Be careful with type equality¶

You generally want to use isa() and <: (issubtype()) for testing types, not ==. Checking types for exact equality typically only makes sense when comparing to a known concrete type (e.g. T==Float64), or if you really, really know what you’re doing.

Do not write x->f(x)¶

Since higher-order functions are often called with anonymous functions, it is easy to conclude that this is desirable or even necessary. But any function can be passed directly, without being “wrapped” in an anonymous function. Instead of writing map(x->f(x),a), write map(f,a).

Avoid using floats for numeric literals in generic code when possible¶

If you write generic code which handles numbers, and which can be expected to run with many different numeric type arguments, try using literals of a numeric type that will affect the arguments as little as possible through promotion.

For example,

julia>f(x)=2.0*xf(genericfunction with1method)julia>f(1//2)1.0julia>f(1/2)1.0julia>f(1)2.0

while

julia>g(x)=2*xg(genericfunction with1method)julia>g(1//2)1//1julia>g(1/2)1.0julia>g(2)4

As you can see, the second version, where we used an Int literal, preserved the type of the input argument, while the first didn’t. This is because e.g. promote_type(Int,Float64)==Float64, and promotion happens with the multiplication. Similarly, Rational literals are less type disruptive than Float64 literals, but more disruptive than Ints:

julia>h(x)=2//1*xh(genericfunction with1method)julia>h(1//2)1//1julia>h(1/2)1.0julia>h(1)2//1

Thus, use Int literals when possible, with Rational{Int} for literal non-integer numbers, in order to make it easier to use your code.