Strings¶

Characters¶

A Char value represents a single character: it is just a 32-bit bitstype with a special literal representation and appropriate arithmetic behaviors, whose numeric value is interpreted as a Unicode code point. Here is how Char values are input and shown:

julia>'x''x'julia>typeof(ans)Char

You can convert a Char to its integer value, i.e. code point, easily:

julia>Int('x')120julia>typeof(ans)Int64

On 32-bit architectures, typeof(ans) will be Int32. You can convert an integer value back to a Char just as easily:

julia>Char(120)'x'

Not all integer values are valid Unicode code points, but for performance, the Char() conversion does not check that every character value is valid. If you want to check that each converted value is a valid code point, use the isvalid() function:

julia>Char(0x110000)'\U110000'julia>isvalid(Char,0x110000)false

As of this writing, the valid Unicode code points are U+00 through U+d7ff and U+e000 through U+10ffff. These have not all been assigned intelligible meanings yet, nor are they necessarily interpretable by applications, but all of these values are considered to be valid Unicode characters.

You can input any Unicode character in single quotes using \u followed by up to four hexadecimal digits or \U followed by up to eight hexadecimal digits (the longest valid value only requires six):

julia>'\u0''\0'julia>'\u78''x'julia>'\u2200''∀'julia>'\U10ffff''\U10ffff'

Julia uses your system’s locale and language settings to determine which characters can be printed as-is and which must be output using the generic, escaped \u or \U input forms. In addition to these Unicode escape forms, all of C’s traditional escaped input forms can also be used:

julia>Int('\0')0julia>Int('\t')9julia>Int('\n')10julia>Int('\e')27julia>Int('\x7f')127julia>Int('\177')127julia>Int('\xff')255

You can do comparisons and a limited amount of arithmetic with Char values:

julia>'A'<'a'truejulia>'A'<='a'<='Z'falsejulia>'A'<='X'<='Z'truejulia>'x'-'a'23julia>'A'+1'B'

String Basics¶

String literals are delimited by double quotes or triple double quotes:

julia>str="Hello, world.\n""Hello, world.\n"julia>"""Contains "quote" characters""""Contains \"quote\" characters"

If you want to extract a character from a string, you index into it:

julia>str[1]'H'julia>str[6]','julia>str[end]'\n'

All indexing in Julia is 1-based: the first element of any integer-indexed object is found at index 1, and the last element is found at index n, when the string has a length of n.

In any indexing expression, the keyword end can be used as a shorthand for the last index (computed by endof(str)). You can perform arithmetic and other operations with end, just like a normal value:

julia>str[end-1]'.'julia>str[end÷2]' '

Using an index less than 1 or greater than end raises an error:

julia>str[0]ERROR:BoundsError:attempttoaccess14-elementArray{UInt8,1}atindex[0]julia>str[end+1]ERROR:BoundsError:attempttoaccess14-elementArray{UInt8,1}atindex[15]

You can also extract a substring using range indexing:

julia>str[4:9]"lo, wo"

Notice that the expressions str[k] and str[k:k] do not give the same result:

julia>str[6]','julia>str[6:6]","

The former is a single character value of type Char, while the latter is a string value that happens to contain only a single character. In Julia these are very different things.

Unicode and UTF-8¶

Julia fully supports Unicode characters and strings. As discussed above, in character literals, Unicode code points can be represented using Unicode \u and \U escape sequences, as well as all the standard C escape sequences. These can likewise be used to write string literals:

julia>s="\u2200 x \u2203 y""∀ x ∃ y"

Whether these Unicode characters are displayed as escapes or shown as special characters depends on your terminal’s locale settings and its support for Unicode. String literals are encoded using the UTF-8 encoding. UTF-8 is a variable-width encoding, meaning that not all characters are encoded in the same number of bytes. In UTF-8, ASCII characters — i.e. those with code points less than 0x80 (128) — are encoded as they are in ASCII, using a single byte, while code points 0x80 and above are encoded using multiple bytes — up to four per character. This means that not every byte index into a UTF-8 string is necessarily a valid index for a character. If you index into a string at such an invalid byte index, an error is thrown:

julia>s[1]'∀'julia>s[2]ERROR:UnicodeError:invalidcharacterindexinslow_utf8_next(::Array{UInt8,1},::UInt8,::Int64)at./strings/string.jl:67innextat./strings/string.jl:92[inlined]ingetindex(::String,::Int64)at./strings/basic.jl:70...julia>s[3]ERROR:UnicodeError:invalidcharacterindexinslow_utf8_next(::Array{UInt8,1},::UInt8,::Int64)at./strings/string.jl:67innextat./strings/string.jl:92[inlined]ingetindex(::String,::Int64)at./strings/basic.jl:70...julia>s[4]' '

In this case, the character ∀ is a three-byte character, so the indices 2 and 3 are invalid and the next character’s index is 4; this next valid index can be computed by nextind(s,1), and the next index after that by nextind(s,4) and so on.

Because of variable-length encodings, the number of characters in a string (given by length(s)) is not always the same as the last index. If you iterate through the indices 1 through endof(s) and index into s, the sequence of characters returned when errors aren’t thrown is the sequence of characters comprising the string s. Thus we have the identity that length(s)<=endof(s), since each character in a string must have its own index. The following is an inefficient and verbose way to iterate through the characters of s:

julia>fori=1:endof(s)tryprintln(s[i])catch# ignore the index errorendend∀x∃y

The blank lines actually have spaces on them. Fortunately, the above awkward idiom is unnecessary for iterating through the characters in a string, since you can just use the string as an iterable object, no exception handling required:

julia>forcinsprintln(c)end∀x∃y

Julia uses the UTF-8 encoding by default, and support for new encodings can be added by packages. For example, the LegacyStrings.jl package implements UTF16String and UTF32String types. Additional discussion of other encodings and how to implement support for them is beyond the scope of this document for the time being. For further discussion of UTF-8 encoding issues, see the section below on byte array literals. The transcode() function is provided to convert data between the various UTF-xx encodings, primarily for working with external data and libraries.

Interpolation¶

One of the most common and useful string operations is concatenation:

julia>greet="Hello""Hello"julia>whom="world""world"julia>string(greet,", ",whom,".\n")"Hello, world.\n"

Constructing strings like this can become a bit cumbersome, however. To reduce the need for these verbose calls to string(), Julia allows interpolation into string literals using $, as in Perl:

julia>"$greet, $whom.\n""Hello, world.\n"

This is more readable and convenient and equivalent to the above string concatenation — the system rewrites this apparent single string literal into a concatenation of string literals with variables.

The shortest complete expression after the $ is taken as the expression whose value is to be interpolated into the string. Thus, you can interpolate any expression into a string using parentheses:

julia>"1 + 2 = $(1 + 2)""1 + 2 = 3"

Both concatenation and string interpolation call string() to convert objects into string form. Most non-AbstractString objects are converted to strings closely corresponding to how they are entered as literal expressions:

julia>v=[1,2,3]3-elementArray{Int64,1}:123julia>"v: $v""v: [1,2,3]"

string() is the identity for AbstractString and Char values, so these are interpolated into strings as themselves, unquoted and unescaped:

julia>c='x''x'julia>"hi, $c""hi, x"

To include a literal $ in a string literal, escape it with a backslash:

julia>print("I have \$100 in my account.\n")Ihave$100inmyaccount.

Triple-Quoted String Literals¶

When strings are created using triple-quotes ("""...""") they have some special behavior that can be useful for creating longer blocks of text. First, if the opening """ is followed by a newline, the newline is stripped from the resulting string.

"""hello"""

is equivalent to

"""hello"""

but

"""hello"""

will contain a literal newline at the beginning. Trailing whitespace is left unaltered. They can contain " symbols without escaping. Triple-quoted strings are also dedented to the level of the least-indented line. This is useful for defining strings within code that is indented. For example:

julia>str="""           Hello,           world.         """"  Hello,\n  world.\n"

In this case the final (empty) line before the closing """ sets the indentation level.

Note that line breaks in literal strings, whether single- or triple-quoted, result in a newline (LF) character \n in the string, even if your editor uses a carriage return \r (CR) or CRLF combination to end lines. To include a CR in a string, use an explicit escape \r; for example, you can enter the literal string "aCRLFlineending\r\n".

Common Operations¶

You can lexicographically compare strings using the standard comparison operators:

julia>"abracadabra"<"xylophone"truejulia>"abracadabra"=="xylophone"falsejulia>"Hello, world."!="Goodbye, world."truejulia>"1 + 2 = 3"=="1 + 2 = $(1 + 2)"true

You can search for the index of a particular character using the search() function:

julia>search("xylophone",'x')1julia>search("xylophone",'p')5julia>search("xylophone",'z')0

You can start the search for a character at a given offset by providing a third argument:

julia>search("xylophone",'o')4julia>search("xylophone",'o',5)7julia>search("xylophone",'o',8)0

You can use the contains() function to check if a substring is contained in a string:

julia>contains("Hello, world.","world")truejulia>contains("Xylophon","o")truejulia>contains("Xylophon","a")falsejulia>contains("Xylophon",'o')ERROR:MethodError:nomethodmatchingcontains(::String,::Char)Closestcandidatesare:contains(!Matched::Function,::Any,!Matched::Any)atreduce.jl:489contains(::AbstractString,!Matched::AbstractString)atstrings/search.jl:310...

The last error is because 'o' is a character literal, and contains() is a generic function that looks for subsequences. To look for an element in a sequence, you must use in() instead.

Two other handy string functions are repeat() and join():

julia>repeat(".:Z:.",10)".:Z:..:Z:..:Z:..:Z:..:Z:..:Z:..:Z:..:Z:..:Z:..:Z:."julia>join(["apples","bananas","pineapples"],", "," and ")"apples, bananas and pineapples"

Some other useful functions include:

• endof(str) gives the maximal (byte) index that can be used to index into str.
• length(str) the number of characters in str.
• i=start(str) gives the first valid index at which a character can be found in str (typically 1).
• c,j=next(str,i) returns next character at or after the index i and the next valid character index following that. With start() and endof(), can be used to iterate through the characters in str.
• ind2chr(str,i) gives the number of characters in str up to and including any at index i.
• chr2ind(str,j) gives the index at which the jth character in str occurs.

Non-Standard String Literals¶

There are situations when you want to construct a string or use string semantics, but the behavior of the standard string construct is not quite what is needed. For these kinds of situations, Julia provides non-standard string literals. A non-standard string literal looks like a regular double-quoted string literal, but is immediately prefixed by an identifier, and doesn’t behave quite like a normal string literal. The convention is that non-standard literals with uppercase prefixes produce actual string objects, while those with lowercase prefixes produce non-string objects like byte arrays or compiled regular expressions. Regular expressions, byte array literals and version number literals, as described below, are some examples of non-standard string literals. Other examples are given in the metaprogramming section.

Regular Expressions¶

Julia has Perl-compatible regular expressions (regexes), as provided by the PCRE library. Regular expressions are related to strings in two ways: the obvious connection is that regular expressions are used to find regular patterns in strings; the other connection is that regular expressions are themselves input as strings, which are parsed into a state machine that can be used to efficiently search for patterns in strings. In Julia, regular expressions are input using non-standard string literals prefixed with various identifiers beginning with r. The most basic regular expression literal without any options turned on just uses r"...":

julia>r"^\s*(?:#|$)"r"^\s*(?:#|$)"julia>typeof(ans)Regex

To check if a regex matches a string, use ismatch():

julia>ismatch(r"^\s*(?:#|$)","not a comment")falsejulia>ismatch(r"^\s*(?:#|$)","# a comment")true

As one can see here, ismatch() simply returns true or false, indicating whether the given regex matches the string or not. Commonly, however, one wants to know not just whether a string matched, but also how it matched. To capture this information about a match, use the match() function instead:

julia>match(r"^\s*(?:#|$)","not a comment")julia>match(r"^\s*(?:#|$)","# a comment")RegexMatch("#")

If the regular expression does not match the given string, match() returns nothing — a special value that does not print anything at the interactive prompt. Other than not printing, it is a completely normal value and you can test for it programmatically:

m=match(r"^\s*(?:#|$)",line)ifm===nothingprintln("not a comment")elseprintln("blank or comment")end

If a regular expression does match, the value returned by match() is a RegexMatch object. These objects record how the expression matches, including the substring that the pattern matches and any captured substrings, if there are any. This example only captures the portion of the substring that matches, but perhaps we want to capture any non-blank text after the comment character. We could do the following:

julia>m=match(r"^\s*(?:#\s*(.*?)\s*$|$)","# a comment ")RegexMatch("# a comment ",1="a comment")

When calling match(), you have the option to specify an index at which to start the search. For example:

julia>m=match(r"[0-9]","aaaa1aaaa2aaaa3",1)RegexMatch("1")julia>m=match(r"[0-9]","aaaa1aaaa2aaaa3",6)RegexMatch("2")julia>m=match(r"[0-9]","aaaa1aaaa2aaaa3",11)RegexMatch("3")

You can extract the following info from a RegexMatch object:

• the entire substring matched: m.match
• the captured substrings as an array of strings: m.captures
• the offset at which the whole match begins: m.offset
• the offsets of the captured substrings as a vector: m.offsets

For when a capture doesn’t match, instead of a substring, m.captures contains nothing in that position, and m.offsets has a zero offset (recall that indices in Julia are 1-based, so a zero offset into a string is invalid). Here is a pair of somewhat contrived examples:

julia>m=match(r"(a|b)(c)?(d)","acd")RegexMatch("acd",1="a",2="c",3="d")julia>m.match"acd"julia>m.captures3-elementArray{Union{SubString{String},Void},1}:"a""c""d"julia>m.offset1julia>m.offsets3-elementArray{Int64,1}:123julia>m=match(r"(a|b)(c)?(d)","ad")RegexMatch("ad",1="a",2=nothing,3="d")julia>m.match"ad"julia>m.captures3-elementArray{Union{SubString{String},Void},1}:"a"nothing"d"julia>m.offset1julia>m.offsets3-elementArray{Int64,1}:102

It is convenient to have captures returned as an array so that one can use destructuring syntax to bind them to local variables:

julia>first,second,third=m.captures;first"a"

Captures can also be accessed by indexing the RegexMatch object with the number or name of the capture group:

julia>m=match(r"(?<hour>\d+):(?<minute>\d+)","12:45")RegexMatch("12:45",hour="12",minute="45")julia>m[:minute]"45"julia>m[2]"45"

Captures can be referenced in a substitution string when using replace() by using \n to refer to the nth capture group and prefixing the subsitution string with s. Capture group 0 refers to the entire match object. Named capture groups can be referenced in the substitution with g<groupname>. For example:

julia>replace("first second",r"(\w+) (?<agroup>\w+)",s"\g<agroup> \1")"second first"

Numbered capture groups can also be referenced as \g<n> for disambiguation, as in:

julia>replace("a",r".",s"\g<0>1")"a1"

You can modify the behavior of regular expressions by some combination of the flags i, m, s, and x after the closing double quote mark. These flags have the same meaning as they do in Perl, as explained in this excerpt from the perlre manpage:

iDocase-insensitivepatternmatching.Iflocalematchingrulesareineffect,thecasemapistakenfromthecurrentlocaleforcodepointslessthan255,andfromUnicoderulesforlargercodepoints.However,matchesthatwouldcrosstheUnicoderules/non-Unicoderulesboundary(ords255/256)willnotsucceed.mTreatstringasmultiplelines.Thatis,change"^"and"$"frommatchingthestartorendofthestringtomatchingthestartorendofanylineanywherewithinthestring.sTreatstringassingleline.Thatis,change"."tomatchanycharacterwhatsoever,evenanewline,whichnormallyitwouldnotmatch.Usedtogether,asr""ms,theyletthe"."matchanycharacterwhatsoever,whilestillallowing"^"and"$"tomatch,respectively,justafterandjustbeforenewlineswithinthestring.xTellstheregularexpressionparsertoignoremostwhitespacethatisneitherbackslashednorwithinacharacterclass.Youcanusethistobreakupyourregularexpressioninto(slightly)morereadableparts.The'#'characterisalsotreatedasametacharacterintroducingacomment,justasinordinarycode.

For example, the following regex has all three flags turned on:

julia>r"a+.*b+.*?d$"ismr"a+.*b+.*?d$"imsjulia>match(r"a+.*b+.*?d$"ism,"Goodbye,\nOh, angry,\nBad world\n")RegexMatch("angry,\nBad world")

Triple-quoted regex strings, of the form r"""...""", are also supported (and may be convenient for regular expressions containing quotation marks or newlines).

Byte Array Literals¶

Another useful non-standard string literal is the byte-array string literal: b"...". This form lets you use string notation to express literal byte arrays — i.e. arrays of UInt8 values. The rules for byte array literals are the following:

• ASCII characters and ASCII escapes produce a single byte.
• \x and octal escape sequences produce the byte corresponding to the escape value.
• Unicode escape sequences produce a sequence of bytes encoding that code point in UTF-8.

There is some overlap between these rules since the behavior of \x and octal escapes less than 0x80 (128) are covered by both of the first two rules, but here these rules agree. Together, these rules allow one to easily use ASCII characters, arbitrary byte values, and UTF-8 sequences to produce arrays of bytes. Here is an example using all three:

julia>b"DATA\xff\u2200"8-elementArray{UInt8,1}:0x440x410x540x410xff0xe20x880x80

The ASCII string “DATA” corresponds to the bytes 68, 65, 84, 65. \xff produces the single byte 255. The Unicode escape \u2200 is encoded in UTF-8 as the three bytes 226, 136, 128. Note that the resulting byte array does not correspond to a valid UTF-8 string — if you try to use this as a regular string literal, you will get a syntax error:

julia>"DATA\xff\u2200"ERROR:syntax:invalidUTF-8sequence...

Also observe the significant distinction between \xff and \uff: the former escape sequence encodes the byte 255, whereas the latter escape sequence represents the code point 255, which is encoded as two bytes in UTF-8:

julia>b"\xff"1-elementArray{UInt8,1}:0xffjulia>b"\uff"2-elementArray{UInt8,1}:0xc30xbf

In character literals, this distinction is glossed over and \xff is allowed to represent the code point 255, because characters always represent code points. In strings, however, \x escapes always represent bytes, not code points, whereas \u and \U escapes always represent code points, which are encoded in one or more bytes. For code points less than \u80, it happens that the UTF-8 encoding of each code point is just the single byte produced by the corresponding \x escape, so the distinction can safely be ignored. For the escapes \x80 through \xff as compared to \u80 through \uff, however, there is a major difference: the former escapes all encode single bytes, which — unless followed by very specific continuation bytes — do not form valid UTF-8 data, whereas the latter escapes all represent Unicode code points with two-byte encodings.

If this is all extremely confusing, try reading “The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets”. It’s an excellent introduction to Unicode and UTF-8, and may help alleviate some confusion regarding the matter.

Version Number Literals¶

Version numbers can easily be expressed with non-standard string literals of the form v"...". Version number literals create VersionNumber objects which follow the specifications of semantic versioning, and therefore are composed of major, minor and patch numeric values, followed by pre-release and build alpha-numeric annotations. For example, v"0.2.1-rc1+win64" is broken into major version 0, minor version 2, patch version 1, pre-release rc1 and build win64. When entering a version literal, everything except the major version number is optional, therefore e.g. v"0.2" is equivalent to v"0.2.0" (with empty pre-release/build annotations), v"2" is equivalent to v"2.0.0", and so on.

VersionNumber objects are mostly useful to easily and correctly compare two (or more) versions. For example, the constant VERSION holds Julia version number as a VersionNumber object, and therefore one can define some version-specific behavior using simple statements as:

ifv"0.2"<=VERSION<v"0.3-"# do something specific to 0.2 release seriesend

Note that in the above example the non-standard version number v"0.3-" is used, with a trailing -: this notation is a Julia extension of the standard, and it’s used to indicate a version which is lower than any 0.3 release, including all of its pre-releases. So in the above example the code would only run with stable 0.2 versions, and exclude such versions as v"0.3.0-rc1". In order to also allow for unstable (i.e. pre-release) 0.2 versions, the lower bound check should be modified like this: v"0.2-"<=VERSION.

Another non-standard version specification extension allows one to use a trailing + to express an upper limit on build versions, e.g. VERSION>v"0.2-rc1+" can be used to mean any version above 0.2-rc1 and any of its builds: it will return false for version v"0.2-rc1+win64" and true for v"0.2-rc2".

It is good practice to use such special versions in comparisons (particularly, the trailing - should always be used on upper bounds unless there’s a good reason not to), but they must not be used as the actual version number of anything, as they are invalid in the semantic versioning scheme.

Besides being used for the VERSION constant, VersionNumber objects are widely used in the Pkg module, to specify packages versions and their dependencies.