# Constructors¶

Constructors [1] are functions that create new objects — specifically, instances of Composite Types. In Julia, type objects also serve as constructor functions: they create new instances of themselves when applied to an argument tuple as a function. This much was already mentioned briefly when composite types were introduced. For example:

```
type Foo
bar
baz
end
julia> foo = Foo(1,2)
Foo(1,2)
julia> foo.bar
1
julia> foo.baz
2
```

For many types, forming new objects by binding their field values together is all that is ever needed to create instances. There are, however, cases where more functionality is required when creating composite objects. Sometimes invariants must be enforced, either by checking arguments or by transforming them. Recursive data structures, especially those that may be self-referential, often cannot be constructed cleanly without first being created in an incomplete state and then altered programmatically to be made whole, as a separate step from object creation. Sometimes, it’s just convenient to be able to construct objects with fewer or different types of parameters than they have fields. Julia’s system for object construction addresses all of these cases and more.

[1] | Nomenclature: while the term “constructor” generally refers to the entire function which constructs objects of a type, it is common to abuse terminology slightly and refer to specific constructor methods as “constructors”. In such situations, it is generally clear from context that the term is used to mean “constructor method” rather than “constructor function”, especially as it is often used in the sense of singling out a particular method of the constructor from all of the others. |

## Outer Constructor Methods¶

A constructor is just like any other function in Julia in that its
overall behavior is defined by the combined behavior of its methods.
Accordingly, you can add functionality to a constructor by simply
defining new methods. For example, let’s say you want to add a
constructor method for `Foo`

objects that takes only one argument and
uses the given value for both the `bar`

and `baz`

fields. This is
simple:

```
Foo(x) = Foo(x,x)
julia> Foo(1)
Foo(1,1)
```

You could also add a zero-argument `Foo`

constructor method that
supplies default values for both of the `bar`

and `baz`

fields:

```
Foo() = Foo(0)
julia> Foo()
Foo(0,0)
```

Here the zero-argument constructor method calls the single-argument
constructor method, which in turn calls the automatically provided
two-argument constructor method. For reasons that will become clear very
shortly, additional constructor methods declared as normal methods like
this are called *outer* constructor methods. Outer constructor methods
can only ever create a new instance by calling another constructor
method, such as the automatically provided default ones.

## Inner Constructor Methods¶

While outer constructor methods succeed in addressing the problem of
providing additional convenience methods for constructing objects, they
fail to address the other two use cases mentioned in the introduction of
this chapter: enforcing invariants, and allowing construction of
self-referential objects. For these problems, one needs *inner*
constructor methods. An inner constructor method is much like an outer
constructor method, with two differences:

- It is declared inside the block of a type declaration, rather than outside of it like normal methods.
- It has access to a special locally existent function called
`new`

that creates objects of the block’s type.

For example, suppose one wants to declare a type that holds a pair of real numbers, subject to the constraint that the first number is not greater than the second one. One could declare it like this:

```
type OrderedPair
x::Real
y::Real
OrderedPair(x,y) = x > y ? error("out of order") : new(x,y)
end
```

Now `OrderedPair`

objects can only be constructed such that
`x <= y`

:

```
julia> OrderedPair(1,2)
OrderedPair(1,2)
julia> OrderedPair(2,1)
ERROR: out of order
in OrderedPair(::Int64, ::Int64) at ./none:5
...
```

You can still reach in and directly change the field values to violate this invariant, but messing around with an object’s internals uninvited is considered poor form. You (or someone else) can also provide additional outer constructor methods at any later point, but once a type is declared, there is no way to add more inner constructor methods. Since outer constructor methods can only create objects by calling other constructor methods, ultimately, some inner constructor must be called to create an object. This guarantees that all objects of the declared type must come into existence by a call to one of the inner constructor methods provided with the type, thereby giving some degree of enforcement of a type’s invariants.

Of course, if the type is declared as `immutable`

, then its
constructor-provided invariants are fully enforced. This is an important
consideration when deciding whether a type should be immutable.

If any inner constructor method is defined, no default constructor
method is provided: it is presumed that you have supplied yourself with
all the inner constructors you need. The default constructor is
equivalent to writing your own inner constructor method that takes all
of the object’s fields as parameters (constrained to be of the correct
type, if the corresponding field has a type), and passes them to
`new`

, returning the resulting object:

```
type Foo
bar
baz
Foo(bar,baz) = new(bar,baz)
end
```

This declaration has the same effect as the earlier definition of the
`Foo`

type without an explicit inner constructor method. The following
two types are equivalent — one with a default constructor, the other
with an explicit constructor:

```
type T1
x::Int64
end
type T2
x::Int64
T2(x) = new(x)
end
julia> T1(1)
T1(1)
julia> T2(1)
T2(1)
julia> T1(1.0)
T1(1)
julia> T2(1.0)
T2(1)
```

It is considered good form to provide as few inner constructor methods as possible: only those taking all arguments explicitly and enforcing essential error checking and transformation. Additional convenience constructor methods, supplying default values or auxiliary transformations, should be provided as outer constructors that call the inner constructors to do the heavy lifting. This separation is typically quite natural.

## Incomplete Initialization¶

The final problem which has still not been addressed is construction of self-referential objects, or more generally, recursive data structures. Since the fundamental difficulty may not be immediately obvious, let us briefly explain it. Consider the following recursive type declaration:

```
type SelfReferential
obj::SelfReferential
end
```

This type may appear innocuous enough, until one considers how to
construct an instance of it. If `a`

is an instance of
`SelfReferential`

, then a second instance can be created by the call:

```
b = SelfReferential(a)
```

But how does one construct the first instance when no instance exists to
provide as a valid value for its `obj`

field? The only solution is to
allow creating an incompletely initialized instance of
`SelfReferential`

with an unassigned `obj`

field, and using that
incomplete instance as a valid value for the `obj`

field of another
instance, such as, for example, itself.

To allow for the creation of incompletely initialized objects, Julia
allows the `new`

function to be called with fewer than the number of
fields that the type has, returning an object with the unspecified
fields uninitialized. The inner constructor method can then use the
incomplete object, finishing its initialization before returning it.
Here, for example, we take another crack at defining the
`SelfReferential`

type, with a zero-argument inner constructor
returning instances having `obj`

fields pointing to themselves:

```
type SelfReferential
obj::SelfReferential
SelfReferential() = (x = new(); x.obj = x)
end
```

We can verify that this constructor works and constructs objects that are, in fact, self-referential:

```
julia> x = SelfReferential();
julia> is(x, x)
true
julia> is(x, x.obj)
true
julia> is(x, x.obj.obj)
true
```

Although it is generally a good idea to return a fully initialized object from an inner constructor, incompletely initialized objects can be returned:

```
julia> type Incomplete
xx
Incomplete() = new()
end
julia> z = Incomplete();
```

While you are allowed to create objects with uninitialized fields, any access to an uninitialized reference is an immediate error:

```
julia> z.xx
ERROR: UndefRefError: access to undefined reference
...
```

This avoids the need to continually check for `null`

values.
However, not all object fields are references. Julia considers some
types to be “plain data”, meaning all of their data is self-contained
and does not reference other objects. The plain data types consist of bits
types (e.g. `Int`

) and immutable structs of other plain data types.
The initial contents of a plain data type is undefined:

```
julia> type HasPlain
n::Int
HasPlain() = new()
end
julia> HasPlain()
HasPlain(438103441441)
```

Arrays of plain data types exhibit the same behavior.

You can pass incomplete objects to other functions from inner constructors to delegate their completion:

```
type Lazy
xx
Lazy(v) = complete_me(new(), v)
end
```

As with incomplete objects returned from constructors, if
`complete_me`

or any of its callees try to access the `xx`

field of
the `Lazy`

object before it has been initialized, an error will be
thrown immediately.

## Parametric Constructors¶

Parametric types add a few wrinkles to the constructor story. Recall from Parametric Types that, by default, instances of parametric composite types can be constructed either with explicitly given type parameters or with type parameters implied by the types of the arguments given to the constructor. Here are some examples:

```
julia> type Point{T<:Real}
x::T
y::T
end
## implicit T ##
julia> Point(1,2)
Point{Int64}(1,2)
julia> Point(1.0,2.5)
Point{Float64}(1.0,2.5)
julia> Point(1,2.5)
ERROR: MethodError: no method matching Point{T<:Real}(::Int64, ::Float64)
Closest candidates are:
Point{T<:Real}{T<:Real}(::T<:Real, !Matched::T<:Real) at none:2
Point{T<:Real}{T}(::Any) at sysimg.jl:53
...
## explicit T ##
julia> Point{Int64}(1,2)
Point{Int64}(1,2)
julia> Point{Int64}(1.0,2.5)
ERROR: InexactError()
in Point{Int64}(::Float64, ::Float64) at ./none:2
...
julia> Point{Float64}(1.0,2.5)
Point{Float64}(1.0,2.5)
julia> Point{Float64}(1,2)
Point{Float64}(1.0,2.0)
```

As you can see, for constructor calls with explicit type parameters, the
arguments are converted to the implied field types: `Point{Int64}(1,2)`

works, but `Point{Int64}(1.0,2.5)`

raises an
`InexactError`

when converting `2.5`

to `Int64`

.
When the type is implied by the
arguments to the constructor call, as in `Point(1,2)`

, then the types
of the arguments must agree — otherwise the `T`

cannot be determined —
but any pair of real arguments with matching type may be given to the
generic `Point`

constructor.

What’s really going on here is that `Point`

, `Point{Float64}`

and
`Point{Int64}`

are all different constructor functions. In fact,
`Point{T}`

is a distinct constructor function for each type `T`

.
Without any explicitly provided inner constructors, the declaration of
the composite type `Point{T<:Real}`

automatically provides an inner
constructor, `Point{T}`

, for each possible type `T<:Real`

, that
behaves just like non-parametric default inner constructors do. It also
provides a single general outer `Point`

constructor that takes pairs
of real arguments, which must be of the same type. This automatic
provision of constructors is equivalent to the following explicit
declaration:

```
type Point{T<:Real}
x::T
y::T
Point(x,y) = new(x,y)
end
Point{T<:Real}(x::T, y::T) = Point{T}(x,y)
```

Some features of parametric constructor definitions at work here deserve
comment. First, inner constructor declarations always define methods of
`Point{T}`

rather than methods of the general `Point`

constructor
function. Since `Point`

is not a concrete type, it makes no sense for
it to even have inner constructor methods at all. Thus, the inner method
declaration `Point(x,y) = new(x,y)`

provides an inner
constructor method for each value of `T`

. It is this method
declaration that defines the behavior of constructor calls with explicit
type parameters like `Point{Int64}(1,2)`

and
`Point{Float64}(1.0,2.0)`

. The outer constructor declaration, on the
other hand, defines a method for the general `Point`

constructor which
only applies to pairs of values of the same real type. This declaration
makes constructor calls without explicit type parameters, like
`Point(1,2)`

and `Point(1.0,2.5)`

, work. Since the method
declaration restricts the arguments to being of the same type, calls
like `Point(1,2.5)`

, with arguments of different types, result in “no
method” errors.

Suppose we wanted to make the constructor call `Point(1,2.5)`

work by
“promoting” the integer value `1`

to the floating-point value `1.0`

.
The simplest way to achieve this is to define the following additional
outer constructor method:

```
julia> Point(x::Int64, y::Float64) = Point(convert(Float64,x),y);
```

This method uses the `convert()`

function to explicitly convert `x`

to
`Float64`

and then delegates construction to the general constructor
for the case where both arguments are `Float64`

. With this method
definition what was previously a `MethodError`

now successfully
creates a point of type `Point{Float64}`

:

```
julia> Point(1,2.5)
Point{Float64}(1.0,2.5)
julia> typeof(ans)
Point{Float64}
```

However, other similar calls still don’t work:

```
julia> Point(1.5,2)
ERROR: MethodError: no method matching Point{T<:Real}(::Float64, ::Int64)
Closest candidates are:
Point{T<:Real}{T<:Real}(::T<:Real, !Matched::T<:Real) at none:2
Point{T<:Real}{T}(::Any) at sysimg.jl:53
...
```

For a much more general way of making all such calls work sensibly, see
Conversion and Promotion. At the risk
of spoiling the suspense, we can reveal here that all it takes is
the following outer method definition to make all calls to the general
`Point`

constructor work as one would expect:

```
julia> Point(x::Real, y::Real) = Point(promote(x,y)...);
```

The `promote`

function converts all its arguments to a common type
— in this case `Float64`

. With this method definition, the `Point`

constructor promotes its arguments the same way that numeric operators
like `+`

do, and works for all kinds of real numbers:

```
julia> Point(1.5,2)
Point{Float64}(1.5,2.0)
julia> Point(1,1//2)
Point{Rational{Int64}}(1//1,1//2)
julia> Point(1.0,1//2)
Point{Float64}(1.0,0.5)
```

Thus, while the implicit type parameter constructors provided by default in Julia are fairly strict, it is possible to make them behave in a more relaxed but sensible manner quite easily. Moreover, since constructors can leverage all of the power of the type system, methods, and multiple dispatch, defining sophisticated behavior is typically quite simple.

## Case Study: Rational¶

Perhaps the best way to tie all these pieces together is to present a real world example of a parametric composite type and its constructor methods. To that end, here is beginning of rational.jl, which implements Julia’s Rational Numbers:

```
immutable Rational{T<:Integer} <: Real
num::T
den::T
function Rational(num::T, den::T)
if num == 0 && den == 0
error("invalid rational: 0//0")
end
g = gcd(den, num)
num = div(num, g)
den = div(den, g)
new(num, den)
end
end
Rational{T<:Integer}(n::T, d::T) = Rational{T}(n,d)
Rational(n::Integer, d::Integer) = Rational(promote(n,d)...)
Rational(n::Integer) = Rational(n,one(n))
//(n::Integer, d::Integer) = Rational(n,d)
//(x::Rational, y::Integer) = x.num // (x.den*y)
//(x::Integer, y::Rational) = (x*y.den) // y.num
//(x::Complex, y::Real) = complex(real(x)//y, imag(x)//y)
//(x::Real, y::Complex) = x*y'//real(y*y')
function //(x::Complex, y::Complex)
xy = x*y'
yy = real(y*y')
complex(real(xy)//yy, imag(xy)//yy)
end
```

The first line — `immutable Rational{T<:Int} <: Real`

— declares that
`Rational`

takes one type parameter of an integer type, and is itself
a real type. The field declarations `num::T`

and `den::T`

indicate
that the data held in a `Rational{T}`

object are a pair of integers of
type `T`

, one representing the rational value’s numerator and the
other representing its denominator.

Now things get interesting. `Rational`

has a single inner constructor
method which checks that both of `num`

and `den`

aren’t zero and
ensures that every rational is constructed in “lowest terms” with a
non-negative denominator. This is accomplished by dividing the given
numerator and denominator values by their greatest common divisor,
computed using the `gcd`

function. Since `gcd`

returns the greatest
common divisor of its arguments with sign matching the first argument
(`den`

here), after this division the new value of `den`

is
guaranteed to be non-negative. Because this is the only inner
constructor for `Rational`

, we can be certain that `Rational`

objects are always constructed in this normalized form.

`Rational`

also provides several outer constructor methods for
convenience. The first is the “standard” general constructor that infers
the type parameter `T`

from the type of the numerator and denominator
when they have the same type. The second applies when the given
numerator and denominator values have different types: it promotes them
to a common type and then delegates construction to the outer
constructor for arguments of matching type. The third outer constructor
turns integer values into rationals by supplying a value of `1`

as the
denominator.

Following the outer constructor definitions, we have a number of methods
for the `//`

operator, which provides a syntax for writing rationals.
Before these definitions, `//`

is a completely undefined operator with
only syntax and no meaning. Afterwards, it behaves just as described in
Rational Numbers
— its entire behavior is defined in these few lines. The first and most
basic definition just makes `a//b`

construct a `Rational`

by
applying the `Rational`

constructor to `a`

and `b`

when they are
integers. When one of the operands of `//`

is already a rational
number, we construct a new rational for the resulting ratio slightly
differently; this behavior is actually identical to division of a
rational with an integer. Finally, applying `//`

to complex integral
values creates an instance of `Complex{Rational}`

— a complex number
whose real and imaginary parts are rationals:

```
julia> (1 + 2im)//(1 - 2im)
-3//5 + 4//5*im
julia> typeof(ans)
Complex{Rational{Int64}}
julia> ans <: Complex{Rational}
false
```

Thus, although the `//`

operator usually returns an instance of
`Rational`

, if either of its arguments are complex integers, it will
return an instance of `Complex{Rational}`

instead. The interested
reader should consider perusing the rest of
rational.jl:
it is short, self-contained, and implements an entire basic Julia type.

## Constructors and Conversion¶

Constructors `T(args...)`

in Julia are implemented like other
callable objects: methods are added to their types.
The type of a type is `Type`

, so all constructor methods are
stored in the method table for the `Type`

type.
This means that you can declare more flexible constructors, e.g.
constructors for abstract types, by explicitly defining methods
for the appropriate types.

However, in some cases you could consider adding methods to
`Base.convert`

*instead* of defining a constructor, because Julia
falls back to calling `convert()`

if no matching constructor
is found. For example, if no constructor `T(args...) = ...`

exists
`Base.convert(::Type{T}, args...) = ...`

is called.

`convert`

is used extensively throughout Julia whenever one type
needs to be converted to another (e.g. in assignment, `ccall`

,
etcetera), and should generally only be defined (or successful) if the
conversion is lossless. For example, `convert(Int, 3.0)`

produces
`3`

, but `convert(Int, 3.2)`

throws an `InexactError`

. If you
want to define a constructor for a lossless conversion from one type
to another, you should probably define a `convert`

method instead.

On the other hand, if your constructor does not represent a lossless
conversion, or doesn’t represent “conversion” at all, it is better
to leave it as a constructor rather than a `convert`

method. For
example, the `Array{Int}()`

constructor creates a zero-dimensional
`Array`

of the type `Int`

, but is not really a “conversion” from
`Int`

to an `Array`

.

## Outer-only constructors¶

As we have seen, a typical parametric type has inner constructors
that are called when type parameters are known; e.g. they apply
to `Point{Int}`

but not to `Point`

.
Optionally, outer constructors that determine type parameters
automatically can be added, for example constructing a
`Point{Int}`

from the call `Point(1,2)`

.
Outer constructors call inner constructors to do the core
work of making an instance.
However, in some cases one would rather not provide inner constructors,
so that specific type parameters cannot be requested manually.

For example, say we define a type that stores a vector along with an accurate representation of its sum:

```
type SummedArray{T<:Number,S<:Number}
data::Vector{T}
sum::S
end
```

The problem is that we want `S`

to be a larger type than `T`

, so
that we can sum many elements with less information loss.
For example, when `T`

is `Int32`

, we would like `S`

to be `Int64`

.
Therefore we want to avoid an interface that allows the user to construct
instances of the type `SummedArray{Int32,Int32}`

.
One way to do this is to provide only an outer constructor for `SummedArray`

.
This can be done using method definition by type:

```
type SummedArray{T<:Number,S<:Number}
data::Vector{T}
sum::S
function (::Type{SummedArray}){T}(a::Vector{T})
S = widen(T)
new{T,S}(a, sum(S, a))
end
end
```

This constructor will be invoked by the syntax `SummedArray(a)`

.
The syntax `new{T,S}`

allows specifying parameters for the type to be
constructed, i.e. this call will return a `SummedArray{T,S}`

.